Myko Electronics Pvt. ltd.
204, B-2, Sakivihar Complex, Sakinaka, Saki Vihar, Mumbai, Maharashtra - 400072, India
Mobile : +91-9869759725, +91-7304761568, +91-8828072467
Phone : +91-22-35670514
Call Us : 08048024619
Three conial beaded edged cups 50 mm. In diameter, attached by arms to a central boss drive a vertical spindle at a rotary speed proportional to the wind velocity.
Aluminum, Brass and Stainless Steel are used throughout this instrument to ensure freedom from corrosion and long working life. A conical shield protects the spindle and bearing from the rain.
An Infra Red Transducer connected to the vertical shaft gives pulses proportional to the number of rotations of the vertical shaft.
This signal is carried through interconnecting cable ( standard length 20 mtrs.) to the Transmitter unit.
4 - 20 mA OR 0 - 5 Volts Dc output proportional to the wind velocity is provided which can be fed to any Data Logger or PLC.
|Range||12 to 200 kmtr / hr OR 3 to 60 mtr / sec|
|Output||4 - 20 mA OR 0 - 5 Volts|
|Supply||220 V AC OR 110 V AC OR 24 V DC|
|Interconnecting Cable||20 Mtrs|
|Processor||Weather Proof (ip 66) Enclosure|