-
sales@mykoelectronics.com -
View Mobile Number
| Business Type | Manufacturer, Exporter, Supplier, Retailer |
| Number Of Flower | Wind Speed Sensor |
| Sensing | 3 Cup Assembly Mounted On Friction-Free Shaft |
| Starting Threshold | 0.3 Meters/sec |
| Click to view more | |
Product Details
Range
0 To 65 Meters/sec
Distance Constant
2.5 Meters
Output
TTL Pulses Output Proportional To Wind
Accuracy
Better Than 0.5 Ms Up To 10 Ms, 2% FSD
Diameter Of Cup
50 Mm
Diameter Of Cup Assembly
165 Mm
Construction
Brass Housing And Stainless Steel Shaft
Principle Of Operation
Opto Electronic Anemometer With Infrared Light Source
Connector
3 Pin Connector For Easy Replacement
Cable Length
10 Meters Of Shielded Cable
We offer cup anemometer. Cup anemometer specifications:
wind speed sensor : 3 cup anemometer.
Sensing : 3 cup assembly mounted on friction free shaft and
coupled to a chopper.
Starting threshold : 0.3 meterssec .
Range : 0 to 65 meterssec .
Distance constant : 2.5 meters
output : ttl pulses output proportional to wind built in line driver to
drive long cable > 50 ohms loop resistance.
Accuracy : better than 0.5 ms up to 10 ms 2% fsd
diameter of cup : 50 mm.
Diameter of cup assembly : 165 mm.
Construction of sensor body : brass housing and stainless steel shaft .
Principle of operation:
anemometer is a fast response, low threshold opto electronic anemometer. When
rotated by wind, a chopper on the anemometer shaft interrupts an infra red light source ,
generating pulses from a photo transistor. The signal is amplified and fed through a line driver .
The frequency is proportional to wind speed. The anemometer is provided with a 3 pin
connector for easy replacement and comes with 10 meters of shielded cable.
wind speed sensor : 3 cup anemometer.
Sensing : 3 cup assembly mounted on friction free shaft and
coupled to a chopper.
Starting threshold : 0.3 meterssec .
Range : 0 to 65 meterssec .
Distance constant : 2.5 meters
output : ttl pulses output proportional to wind built in line driver to
drive long cable > 50 ohms loop resistance.
Accuracy : better than 0.5 ms up to 10 ms 2% fsd
diameter of cup : 50 mm.
Diameter of cup assembly : 165 mm.
Construction of sensor body : brass housing and stainless steel shaft .
Principle of operation:
anemometer is a fast response, low threshold opto electronic anemometer. When
rotated by wind, a chopper on the anemometer shaft interrupts an infra red light source ,
generating pulses from a photo transistor. The signal is amplified and fed through a line driver .
The frequency is proportional to wind speed. The anemometer is provided with a 3 pin
connector for easy replacement and comes with 10 meters of shielded cable.
Looking for "Cup Anemometer" ?
piece
